Custom TPU Feet for the MK2 and MK2.5 Printers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These custom feet are meant to be a replacement for the stock felt pads.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 1
- Views
- 321
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I printed these feet as replacements for the felt pads that came stock on my MK2S. When I was printing new Y-corners I needed a solution for the felt pads that were being tossed with the old parts and this was the easiest solution with the materials I had on hand. I modified the Y-Corner models to include the hole and make it easier for mounting.
Required Parts:
- 4X Printed TPU feet
-4X Printed PETG Y-Corners
- 4X M3X8 Flat Head Cap Screws
I used a tap to thread the holes before assembling, but you should have no problem using the screws to cut their own threads. DO NOT OVER TIGHTEN. If you tight the screws too much it will cause the feet to bow out.