Angled Base For Nullbits Nibble
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6 degree base for the Nibble keyboard
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 446
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This base replaces the stock fr4 bottom plate to give the Nibble keyboard a 6 degree typing angle.
The original bottom plate screws can be used to attach the new base to the keyboard, be warned that depending on your Nibble revision that it is possible that one screw hole does not line up with the standoffs, you can safely omit this screw.
Split models included for smaller printers, each half is connected to the keyboard witch plenty of screws so no need to glue the two halves together.
For best results orient the model on the build plate so the “001xNullbits” text points upwards.
Enable supports (for the TRRS connector clearances in each of the top corners).