Chubby cauldron plant pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plant pot with chubby aesthetic
- Rating
- 5 / 5
- Likes
- 109
- Downloads
- 264
- Makes
- 2
- Views
- 955
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Revisited one of my first designs, made some improvements and settled on the aesthetic of a thicc plant pot, reminiscent of a cauldron.
Print upside down, rim on the print bed. A brim might be necessary due to small surface area of the rim. Supports are probably not necessary but if your printer can't bridge the gap you can use a single support in the middle that runs perpendicular to the first bridging layer (saves a lot of time and material as opposed to automatically generated supports). Alternatively, beforehand you can print the support file that I included, facing down, insert it as a support when printing the cauldron. Ideally in a material that doesn't stick to your main material (like using PETG support for a PLA print).
- Perimeters: ≥2
- Infill: ≥15%
- Print time: approx 4 hours
I also included the F360 file, perhaps a bit messy but the model is fully parametric. You can set the amount of legs, length, angle and more.