Circuitron Tortoise Turnout Motor Drilling Template
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.92 – €1.12 net (excluding VAT)
For file: Template_0.2mm_PLA_MK3S_1h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.02 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.01 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a drilling template for the Circuitron Tortoise Turnout Motor mounting holes.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 173
- Makes
- 1
- Views
- 678
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a template for easy drilling of Circuitron Tortoise Turnout Motor mounting holes. The Tortoise is a well regarded, slow motion turnout motor that provides reliable operation of model railroad turnouts.
Use: Drill a 1/4” hole centered on the turnout throw bar between the track rails. Secure the template under the layout with tape up to this hole with the 1/4” hole centered above the arrow on the template. There are two 1/4"holes off the centerline that can be used for special clearance applications. Drill the pilot holes for #4 x 1/2" wood or sheet metal screws at the four smaller on the template with a 3/32” or #42 drill bit. The arrow on the template should be parallel to the rails.