Apex Legends Peacekeeper shotgun
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Orientate the parts in the best direction for you to minimize support material.
- Rating
- 5 / 5
- Likes
- 142
- Downloads
- 426
- Makes
- 2
- Views
- 5,041
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
Orientate the parts in the best direction for you to minimize support material. every part has been cut to have a fairly large surface to get a nice first layer with.
its been sliced to fit most print build volumes. all of the parts were printed on my Prusa I3 Mk3. there are pegs on just about every part to help with putting the thing together. I used 3D Gloop to fuse all of the part together and the bonds are strong.
The Lever and Receiver are not static parts they both move a little bit. There is 1 hole on both the receiver and the trigger intended to hold a single 15mm disc magnet each which reasonable holds the two pieces together. i also used two small 8x3mm magnets to hold the lever to the body. i just glued those to the surface of each.
Not pictured are the rails, two for the top, one for the bottom, and a sight for the shotgun
RT = Right Top Barrel
RL= Right Lower Barrel
LT = Left Top Barrel
LL = Left Lower Barrel
Happy Printing Y'all!