Infill samples
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Infill options from prusaslicer printed all in one board
- Rating
- 4 / 5
- Likes
- 78
- Downloads
- 494
- Makes
- 3
- Views
- 3,206
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What makes this different from the other infill samples in printables?
Other designs found in this repository don’t show the patterns correctly. Some infills, like Archimedean Chords, start from the center of the model.
This design is made so every pattern is individual. Achieving this in one print, sadly, it’s not currently possible, to circumvent that, this is designed to be printed whit two separate gcodes, one for the board and one for the samples.
You just need to start printing the second gcode right after the first one finishes, leaving the previous print in the bed. It's supposed to print on top of the first print.
This doesn’t include the Adaptive cubic infill because that infill can’t be appreciated at this size.
The files uploaded are made for a layer height of 0.3 mm, if you change this, make sure you change the z offset of "Patterns.3mf".