W124 Hood Latch Pad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This part is used on the upper front cross member on a W124 chassis Mercedes-Benz as a pad for the hood latch. When…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 71
- Makes
- 0
- Views
- 659
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This part is used on the upper front cross member on a W124 chassis Mercedes-Benz as a pad for the hood latch. When the hood is being closed, the release latch slides across this pad before locking in. From factory this part comes with the rivet integrated, but it has a tendency to always break off when removed, therefore a 3-in-1 in my re-design.
Tested on a real car, works a treat!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30% cubic
Filament: NoName PETG black
Notes:
Recommended materials:
* PETG/ABS/Nylon for the pad and locking pin * Flex for the rivet (it might not fit if printed from rigid plastic)Recommended infill:
= 30% for the pad, cubic recommended
- solid for both the rivet and pin
Recommended position:
- rivet and pin - top-down
- pad - along side edge (may need a brim on some printers)
No supports are required for either part.
Category: Automotive