1 / 3
Clothing rack support connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wing/Arm support connector for Type A Gullwing / Cross Wing drying Rack.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Connector pipe diameter – 9.5mm
Layer Height: 0.2mm
Material: PETG
Openscad model requires NopScadLib
Assembly
#1 Stick the two printer parts together with connecting rod, through the protruding side sections, the connecting rod must go all the way in and be visible from the base rod hole.
#2 Insert the base rod on the both sides, at the same time.
The fit is tight but not too tight and should work without any glue. Remove any residual glue left on the rod after removing the damaged parts.