1 / 3
Ultimaker 2 LGX lite Dragon toolhead
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the stock extruder and hot end with an LGX lite and Dragon in direct drive configuration
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 135
- Makes
- 0
- Views
- 1,279
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Parts required
1x LGX lite
1x Phateus Dragon SF/HF Hotend
1x Heater cartridge 24V ≥30W to suit Dragon
1x 40mm x 4mm OD PTFE tube for between extruder and hotend
4x M2.5x6 CSK screws for Dragon
4x M3x8 CSK screws for LGX
5x M3x35 Cap screws, 4 for holding the body together, 1 for attaching the cables to.
4x M3 Heatserts for the top
1x each 3D printed part
Reuse the 3 original fans and their screws, as well as the original PT100 sensor.
Print Settings
2 Walls, 20% infill is sufficient. Preferably print in ABS for heat resistance but PETG works as well.