Teapot Coaster w Honeycomb Infill
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.02 – €1.24 net (excluding VAT)
For file: CoasterTeapot_0.2mm_PETG_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.13 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.27 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Teapot Coaster: textured with PrusaSlicer using NO top layer, 6 bottom layers, and honeycomb infill at 15%.
- Rating
- 4 / 5
- Likes
- 33
- Downloads
- 94
- Makes
- 1
- Views
- 342
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
This is a Teapot Coaster. It is textured with PrusaSlicer using NO top layer, 6 bottom layers, and honeycomb infill at 15%. I changed filament colors after the bottom layers to make the two color effect. The posted gcode does this for you.
I've also included 4, 6, and 8 slot holders for the coasters. Those can be printed without support and 25% infill.
Note on the coaster: the small amount of filament needed for the bottom layers allowed me to use up my filament remnants and make the coasters pretty.