Philips SpeedPro Max 32mm nozzle adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for 32mm regular vacuum cleaner nozzles to be used with Philips SpeedPro Max
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 317
- Makes
- 1
- Views
- 1,423
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a remix, the original model was made for ~35mm nozzles and didn't fit my 32mm ones, so I decided to create my own version of it.
The diameter of the tip is 31.4mm and it increases to 32.2mm, it friction fits very nicely any 32mm vaccum cleaner nozzle.
Printed with Prusament PETG Carmine Red (it is a really nice color match :D), but I think it should work with any PLA as well.
Can be printed as seen on the picture, but I suggest to print it with brim, as the model is quite tall and has very small contact area.
I used
- 25% infill
- 2 perimeters
- 2mm outer and inner brim
- aligned seam position to make it look nicer when used
Also attached the GCODE, but I suggest to create your own, my settings are tweaked for the BondTech extruder.