Flashforge Creator Pro -Flexion Fan Duct-V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FF Creator Pro-Flexion Fan Duct for the Flexion HT Extruder, Designed for easier "Bridging" of the long duct section.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 65
- Makes
- 0
- Views
- 596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a remix, Thanks to him for a great "re-design" for the Flexion HT.
The creator who remixed a popular original left out an important aspect of this model
which is support.
You can print his creation vertically (As Pictured) but your support will not reach the second air nozzle at the correct height thus it will not be attached to the high nozzle altogether.
The nozzle near the Turbo Fan "at the top of the vertical orientation" will print basically in mid-air.
I made a channel inside the model to allow it to be printed flat on the build plate without needing support for the long duct, your printer will "Bridge" easier with this channel in place.
I recommend ABS because PLA and possibly PETG will sag overtime from the heat.
Note: This is a remix of this model found here (https://www.thingiverse.com/thing:2596353)