1 / 4
Starlane GP4 mount for Yamaha R6
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for a Starlane GP4 Lap Timer
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 94
- Makes
- 0
- Views
- 1,251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This allows you to install a Starlane GP4 on top of the top yoke of a Yamaha R6 or any bike that has holes on top of the yoke separated by ~125/130mm.
There are two holders, one at 25 degrees and the other one at 35 degrees.
Hardware:
- 2 x heat set inserts M5x10mm ( designed for these from CNCKitchen's store), must be inserted in the holder.
- 2 x 5x16mm BHCS, to attach the holder to the plate
- 2 x 5x40mm SHCS, to attach the plate to the top yoke
- 2 x M5 Nylstop nuts
- 1 x M8x45mm (minimum) nut to replace the one that Starlane provides
Print settings:
- ASA (recommended) or ABS
- 0.3mm layer height
- Infill 40% min
- No support
The files are already oriented for max strength / no support.