JBL Control One Desk Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desk Stand for JBL Control One, with a 10° Tilt
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 86
- Makes
- 2
- Views
- 775
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
I was fed up with Speaker stands not really conforming to the underside of a JBl Control One. So i made a stand myself.
It doesn't interfere with the speaker Grille, so you can take it on and off with ease. The contour of the stand follows the roughly 40mm radius of the boxes outside.
The Stand angles the box at 10°, for easier printing on smaller printers, the back is open so you can print two at the same time.
Post Print if you want to add some foam tape to underside of stand to reduce vibration transfer from the Box+Stand combo to workplate, but that's highly optional