Hard Drive Cage Kit Type B for Fractal Design cases
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HDD cage for Fractal Design cases
- Rating
- 0 / 5
- Likes
- 79
- Downloads
- 484
- Makes
- 0
- Views
- 4,262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE:
====================
If your tray is bigger than 14mm tall and 110mm wide you might have fitting problems.
I recommend printing a test first (or pause and park the toolhead) with like 1cm of the cage, and try the fitment I've included a 1cm fit test for those interested.
V3:
---------------------
Even more spacing!
V2:
---------------------
Thanks to imnotjames for pointing out I didn't leave room for any tolerances in my model. I updated it adding 0.6 mm between the top of the tray and the bottom of the rail.
I also added more mounting holes for the top SDD, because the original holes probably didn't have any room for the SATA connectors.
Original post:
---------------------
I haven't found a printable 3D model of the drive cage for several Fractal Design cases, so here it is. I haven't printed it personally because I don't need it. I just modeled while it was out of the Meshify 2 case I just bought because I'm waiting on other parts.
I hope somebody finds it useful and that the holes I modeled really fit. :P
Print it face down so you should not need any supports at all.
I based my model off this Type B tray:
https://www.thingiverse.com/thing:4487637