LED Light Mount for Raise3D N2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a set of two mounting brackets to mount a LED strip lamp to the top left shelf of the Raise3D N2 printer. Each…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 37
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Here is a set of two mounting brackets to mount a LED strip lamp to the top left shelf of the Raise3D N2 printer. Each bracket consists of two parts. The bottom parts are attached to the shelf using the original screws and have a lip that fits over the edge of the shelf to keep them from rotating. The top part attaches to the plastic end of the LED strip lamp. In order to adjust the lighting angle, the top part of each bracket can swivel on the bottom part. The mating surfaces of the two parts have teeth to limit the adjustment to fixed angles, which avoids drooping and makes it easier to "sync" the angle between the two brackets. This kind of joint is called a Hirth joint.
The brackets use two M4 20mm screws with washers and hex nuts.
The lamp is a Qooltek Portable USB 60 LED 10W strip light that I bought from Amazon.com (http://www.amazon.com/Qooltek-Portable-Reading-Eye-care-Orchestra/dp/B00XC2XCNU).
Print Settings
Printer:
Raise3D N2
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
I printed the final version in polycarbonate since the enclosure gets pretty hot with the top on.
Designed in Autodesk Fusion 360.
Category: 3D Printer Accessories