1 / 3
Otto DIY Nutcracker robot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Part List
- 1 x Arduino NANO board
- 1 x Arduino NANO Shield I/O
- 1 x USB-A to Mini-USB Cable
- 1 x HC-SR04 Ultrasound sensor
- 4 x Micro servo SG90 9g
- 1 x Buzzer
- 6 x Female/Female Dupont Wires
- 1 x battery holder (stacked 2x2 a total of 4AA Battery)
- 4 x AA Batteries Alkaline (must be new or have 1.5V each)
- 1 x Micro Switch Self lock On/Off 8x8mm
- 6x Otto DIY 3D printed parts
- 1 x Small Phillips screwdriver
You will need to download and 3D print all the Starter biped parts but the feet in the same color as the picture from here:
Otto DIY | Download free STL model | Printables.com
We invested lots of time and resources to provide open source code, software and hardware, please support this project by just giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers and makers. Join today our Otto Builder community