1 / 2
Bender Arduino Humanoid robot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Robot Otto Bender with arms By Oscar Rodriguez aka. Redxvb Futurama Robot based on The Open Source Robot Otto DIY
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 323
- Makes
- 0
- Views
- 2,319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Funny Robot Bender a combination of the Open Source Otto with arms
Bill of materials (BOM)
- 6 x SG90 or MG90s SERVOS
- 1 x Arduino NANO atmega328 version
- 1 x Arduino NANO I/O shield
- 1 x HC SR04 ultrasonic module
- 1 x piezo 5volt buzzer
- 12 x Female to female hook-up wires
- 1 x Bluetooth module (optional)
- LIPO battery 3.7volt and a suitable DC-DC converter module (optional)
- 3D printed parts from files folder
Machines & Software
Recommended to use a FDM 3D printer with PLA material.
20% infill
supports for the feet Only as they need to printed as they are provided
I use a RAFT to help stick to the bed, this is optional
There should be no need to rotate any parts, print as they are shown.