PETG+OBC Tourniquet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a specialized version of the PETG tourniquet. The body has been tuned, tested and adjusted to print in OBC.
- Rating
- 4 / 5
- Likes
- 57
- Downloads
- 146
- Makes
- 1
- Views
- 1,438
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified version of the PETG tourniquet. The Body has been tuned and tested and adjusted to work with OBC. Body will likely also work with some TPUs and polypropylenes of the same or similar shore hardness. More testing is required.
Warning: flexible filament must be used for the body of the tourniquet to avoid fracturing and or splintering when stress is applied in use.
Strap/webbing dementions
Length: 39"-40" increase length if required
Width: 1"
Velcro dementions
Length: 5" for one sided (2 lengths cut requiring overlap on bottom),
8" or 20cm two sided (1 length cut) Recommended
Width: 1"