Toy Dagger with Scabbard (Version 2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toy dagger made to be less pointy and sharp. Scabbard has side hook to hang at a slight angle from left or right side.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 168
- Makes
- 3
- Views
- 832
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Version 2: Updated scabbard so side hook is thicker and less prone to breaking.
With specs provided by a 10 year old who likes to play ninjas, spies, etc., I designed this to be a little safer than most daggers available. This dagger has a blunt tip and rounded edges. The scabbard that holds the dagger can hang from a belt or pants at the waist. For ergonomics, the belt clip is at an angle with a mirror image version so a scabbard can be worn on each side.
Everything prints without supports. The blade/hilt prints vertically with the hilt providing enough support on the printer. The handle prints separately also vertically. There is also a small key to print which is used to align the blade/hilt and handle when gluing together. When printing the blade/hilt, I added a filament change during the print so the hilt can be printed a different color from the blade. Left and right scabbard versions also print vertically without supports.
I printed everything at 0.2mm and 15% infill.