1 / 4
Time Lapse for Panasonic Lumix-LX3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can also be used for remote release. Only the 3D print, without electronics.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 18
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are only the 3D-printed parts for building a remote shutter or a timelapse unit for the LX3 digicam.
Micro servo SG90
4 cylinder head screws M2.5 x 10 mm
1 knurled head screw M3 x 10 mm
1 nut M3
PLA will do.
My timelapse controller consists of an Arduino Nano (programmed in C) and a MAX7219 LED Display. Is operated with a micro joystick.