3-Credit/Advancement Token - NISEI (Android: Netrunner)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A credit and advancement token using the NISEI credit logo and a custom advancement graphic.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 86
- Makes
- 1
- Views
- 823
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
After getting back into Netrunner (by roping in a friend) and buying NISEI's "System Gateway", I decided it was time for updated tokens. Thanks to the team at NISEI for keeping the game alive and I hope that the community enjoys this design! More to come in the future.
This token has text on it (the 3 value). I decided to have the token flip along its top/bottom edges, which means that if you flip it along the right or left edge, it the text will be upside-down. I realize that the original tokens for Netrunner had 1 and 5 value credits and only single value advancement tokens, but I have found that there are many cards that generate or give 3 credits in NISEI, which was the reason for this design. The nature of FDM 3D-printing means that the print needs to be supported from underneath and while bridging is an option, I felt that it made more sense to have a better structure (hence the idea for a 3-value advancement token). While it's probably not used as much, it can be handy for corp turns where they spend 3 actions to advance.
Printing instructions:
- Introduce filament swaps in your slicer software at 0.8 and 1.6mm.
- I've had good success with 0.2 mm layer height
- I had to heat my bed a bit hotter than usual to keep the small surface area stuck to the build plate.
- Print with the advancement side face-down.
- I strongly recommend disabling elephant foot compensation since many of the features are very thin and they get deleted by this on the first layer.