1 / 3
Fire EMS spinner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spinner featuring Maltese Cross and the Star of Llife
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 80
- Makes
- 3
- Views
- 493
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v3.0
Being a firefighter paramedic I thought I would offer up a Fire EMS spinner. you can print with layer height of 0.20mm from 0-1.40mm then 0.10mm layer height from 1.4mm-4.6mm then finish with a layer height of 0.2mm from 4.6mm-6mm. This will allow it to spin smoother. As is, it will print with top and bottom layers for both inner and outer pieces but if you select the inner star, you can do no top and bottom layers and use a gyroid infill to have a cool effect.