CM3D and Vertex Extruder Lever Remix (aligned with filament path) - F365 File included
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The "original" lever had to much play - the gear was not aligned with the filament path. Tested on CM3D Extruder
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
The "original" lever had to much play - the gear was not aligned with the filament path. I solved it on the lever mount point for the gear (the mount point for the gear is now a bit smaller for a tight fit and pushed in the direction that the gear is aligned)
I also had to use some spacer on the extruder to get there the gear aligned with the filament path. Update: 31.12.2022 - here you find the spacer
With the new spacer (for the Extruder) and this lever I can now print TPU and have no more skipping filament. I know that the fitting is tight, but it works perfectly.
Tested on CM3D Extruder
I use the 10USD gear set that was in the link from the CM3D description. The remix was made for this: https://a.aliexpress.com/_vWQD1D
Update
- 02. August 2022 - Until now it works perfect for about 12 weeks and I never had any filament skips again. The remix does it's job.