Sheath for Huusk knife
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple sheath for the Huusk kitchen knife. Feel free to remix and adapt for other applications. Import the…
- Rating
- 3 / 5
- Likes
- 8
- Downloads
- 67
- Makes
- 1
- Views
- 427
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a simple sheath for the Huusk kitchen knife.
Feel free to remix and adapt for other applications.
Import the file to you slicer 2 times. Mirror one of the parts around the Y axis (in Cura), so that you get two fitting halves for one complete shell.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Infill:
100
Filament:
Generic PETG
Notes:
I have printed it with PETG, 240°C and 70°C bed temperature, 100% infill on my Neptune 2.
Finalising
Sand the ridges lightly (e.g. 360 grid) and wipe off the dust. Super glue the ridges and press both halves firmly together for several seconds.
I have used a filled kettle as a weight and waited 5 minutes for the glue to fully cure. Once done, the sheath is ready to use.Category: Kitchen & Dining