Hose watering nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.97 – €2.40 net (excluding VAT)
For file: HoseWaterer_0.2mm_PETG_MK3S_2h31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.18 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2.51 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Great for watering plans. Good flow/volume but low pressure!
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 185
- Makes
- 0
- Views
- 1,080
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a nozzle I made for a standard (US) garden hose. GREAT for water smallish things like container or potted plants where you want a decent amount of volume without high pressure hurting plants.
Recommend something water-resistant like PETG or ABS (not PLA). Print as-is, flat-side down, no supports.