1 / 1
Bestway steel pro nozzle 65° — image 1

Bestway steel pro nozzle 65°

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Some Bestway pools need smaller outlet nozzles, this is a 65° nozzle that simply presses in.

Rating
0 / 5
Likes
21
Downloads
197
Makes
2
Views
1,263
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

We own a Bestway steel pro pool 259x170, and the nozzles that we found for bigger pools don't fit into the integrated tubes. This is a simple press-fit nozzle.

When you use a directed nozzle, turn it so the water runs clockwise through the pool. This makes sure that dirt particles pass by the suction hole so they can be pulled into the filter. 

This is especially important if you use a skimmer, to avoid leafs etc standing still in some corners of the pool. 

Print at 0.2mm lh and 0.4-0.45mm lw, I used 2 perimeters and 30% infill. A UV-resistant material like ASA is recommended. The orientation is correct for printing.

No supports are needed, I recommend a brim because the bottom has little surface.

Tags