Dragonfruit Planter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An elaborate, 8-pot planter...can also be used as a drink table :)
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 30
- Makes
- 0
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
So, here we have the solution to a dry climate, simply pour water into the cup (for equal distribution) or spill on the countertop for unequal distribution of water for up to eight different plants. As there are two drink pads, the condensation from your beverage will help the little plants thrive!
The cup at the bottom will catch excess water from drainage to be used again :)
All items can print without support (flip cup upside down for printing btw). I'd recommend around 20% infill for all. Also, if you plan to put this outdoors, use PETG please.
For the feet, I'd recommend TPU (if you can print this) at 15% or so and glue with Gorilla Glue. You will need eight of these (they will help with drainage). The tabs are for writing down the names of the plants and sticking them into the associated pots.