1 / 6
Apple TV protection shell
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Apple TV protection shell for first gen siri remote.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 1
- Views
- 341
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Since i have small children i looked around for a protection case for the Apple TV remote, but the ones that protected the remote was interfering with the touchpad so i made my own.
Made the model in Fusion 360.
It require some double sided tape that goes in the recess.
I printed mine with TPU, orientation is charging port face down.
Print settings:
240C Nozzle, no bedheat, 0.4 nozzle , 0.2 layer, 4 walls, 5top/bottom, 0 infill, gapfill the first 4 layers, no z-hop, 0 retraction, single perimeter loop.