Customizable stack-able box with label to hold ammunition.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NOTE: If you get an error from the Thingiverse Customizer you will need to download and open the file in OpenSCAD You…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 58
- Makes
- 0
- Views
- 505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
NOTE: If you get an error from the Thingiverse Customizer you will need to download and open the file in OpenSCAD You can get the tool at https://www.openscad.org/.
This is a scad file to create a stack-able box with round holes. I use the boxes to store ammunition that I have reloaded. You can change the diameter of the holes (i.e. what is the shell diameter) Overall length of the object to be stored (OAL of the finished round). A label for the box. And the number of Rows and Columns to be found in the box.
For example if making a box to hold twenty five 9mm Luger rounds the following values would be used for the variables.
internalCube = 9.5;
OAL = 29.75
textForBox = "9mm"
numRows = 5
numColumns = 5
It is advisable to give a bit of extra room for the diameter of the round and the OAL of the round as some filament may shrink and it makes for an easier extraction.
I print 1 lid per stack of boxes as the box above acts like a lid.
Category: Sport & Outdoors