Gravity Broom Holder - Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified for 27-35mm
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 304
- Makes
- 6
- Views
- 3,038
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
The first design which turned out to be a broom holder and not a broom dropper! Unfortunately the "gear" came off at the top but in the first print a small piece of scrap glued on with superglue fixed the problem This add-on is already integrated in the attached files.
As my garden tools all have larger diameter I increased the size by around 7mm. That also increases the distance between the mounting screws to 32mm.
Printed in lowest cost PLA, 9€/kg including shipping. Print parameters 0.3mm layers, 15% cubic infill with dual lines, no support, skirt.
A rubber band around the groove in the "gear" seems to be mandatory.
As I had issues with my printer printing the lip as it should be (worked better in PETG, better material) I also made a split version. There you insert the gear, push the second part on and if it doesn't want to hold a drop of superglue in the two alignment holes does the job. However, if your print results are better don't use -split-1 and -2.
The picture with 4 units is left left to right original, new w/ frame in PETG, new with glued on lip, new in split version.
My remix can handle ~27-35mm, quite common for garden tools