Bamboo ant nest
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is not ready to print. You have to add modifier to create mesh for moisture at the back of the nest like in…
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 151
- Makes
- 1
- Views
- 2,017
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is not ready to print. You have to add modifier to create mesh for moisture at the back of the nest like in the picture.
I also uploaded Prusaslicer project file(.3mf). This should be much easier, you just open it with Prusaslicer then choose your print setting, printer and filament profile then print.
After you printed, you will need a 2 cm. wide X at least 12 cm long clear X 2 mm. thick acrylic sheet as an inner lid, a piece of PVA sponge is optional, I add it as ants can drink water from it.
The nest can connect to an acrylic Outworld made for 15 mm. tube.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
15
Filament: PLA
Post-Printing
Custom Section
This mesh need a modifier.
Category: Pets