1 / 4
Death Star Wall Panel (Photography)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Death Star Wall Panels
- Rating
- 5 / 5
- Likes
- 151
- Downloads
- 629
- Makes
- 3
- Views
- 3,608
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
I wanted to design a few backgrounds that could be backlit for small model photography. After printing, you can back with a filter material or paper. I ended up using white index cards. The stands should be press fit, but may require a dab of glue depending on your printer.
Models - Descriptions
- Empire_Wall_Panel-168mm - 168mm wide panel.
- Empire_Wall_Panel_84mm - 84mm wide panel.
Stands
- Empire_Wall_Stand_168mm - Full length wall stand (Reduce length 24mm if doing a corner, or reduce length to 84mm if doing the 84mm wall).
- Empire_Wall_Stand_Corner - 24mm Corner for use when joining two walls at 90°
My Print Settings:
- 4 perimeters
- Models should be printed face down (default of downloaded .stl)
- 0.20mm Layer height
Original Redesign/Remix from this panel: https://www.thingiverse.com/thing:2537299