1 / 3
better Ryobi Caulking Gun Plunger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The cartridges leaked at least 1/4 of the caulk out the back with the stock plunger. This mod fixed the issued for me.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 177
- Makes
- 0
- Views
- 1,044
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock plunger did not press evenly on the cartridge plunger leading to enormous leakage at the back of the cartridge.
I almost exclusively use the polymere cartridges from Würth (German professional hardware store)
I used a metal washer inside of the part to distribute the load of the push road. Add a pause in the gcode to insert said washer. The cavity is 30x1.6mm big.
Use plenty of infill and shells.