1 / 5
Small pool / whirlpool chlor swimmer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a smaller pool swimmer for chlorine
- Rating
- 4.5 / 5
- Likes
- 23
- Downloads
- 148
- Makes
- 1
- Views
- 1,164
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
It's a smaller chlorine pool/spa swimmer than the ones you can buy at the hardware store. I also thought it would be cool to construct one myself. As you can see from the pictures above, it floats without sinking. The assembly is simply plugged together, fill with chlorine and put it into the pool. It is best to scale down the whole body to 71.47% and print with the opening facing down.
print settings:
0.2 layers height
- Feed of 50-70 mm/s
- Raft not necessary
- Supports for the Schwämmer_teil1 recommended and printing with the opening facing down Filling of 10% is sufficient
- Best printed with Petg or other materials, because PLA is getting attacked by chlorine