Tripod base or a projector lamp
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.03 – €6.15 net (excluding VAT)
For file: CE3_fixation trepied lampe v2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.59 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 7.29 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tripod head replacement for a projector lamp
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 20
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Hello, this is my first printable design. My cats jump onto the lap and broke it so i remade the base that hold the foot in place. It
you need:
-3x m6 screw and nut (at least 40mm long)
-3x m4 wood screw (typicallity the ikea leftover)
-1x m9 nut
-1x m9 headless bolt
(you can also replace the bolt and nut by a simple hexagonal head bolt m9)
Print setting:
I suggest PETG for the load, but PLA might work too.
Print in 0,12mm layer height
20% Infill in black PETG