Universal tripod

Universal tripod.

3d prined tripod for universal usage. 

It is finished with a screw hole or a threaded insert. Is allowed to mount various connection for your devices.

Tripod is consist of 3D prited :

3x soulder    

1x body

1x clamp 

1x ball joint

Purchased parts :

3x Thred  insert M4

• In needs to be modified - lenght 5,5mm

2x Thred  insert M3

• in original shape

3x M4x6

2x M3x10

1X Solid knob -VTT.25-p-M5x10

https://www.elesa-ganter.com/en/www/Clamping-knobs--Solid-knobs--VTT#listtype=search&term=Vtt.25

Montage

1. Install all thred iserts into body part.
2. Put ball joint into clamp part.  It needs to be slightly open up with screw driver. 
3. Screw it together.
4. After assembly tighten a clamp slightly. Put into ball joint a screw driver and move around all directions. It makes surface smoother. 
5. I recomand to disaasamble body from clamp and clen it up from dust. 
6. Assamble again :-)
7. Finish

Possibility of mounting 

 For using of this tripod you can choose two ways how to cennect you device.

• M6 inserted screw 
• M5 inner thread

Phone mounting

For my pupose I decide to prepare flexible bracket witch is souitable for phone of width apx. 70-80mm.

For a good function is necesary to test spring !