1 / 8
SDR RSP1 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of an SDR case I found on Thingiverse. https://www.thingiverse.com/thing:4988416
- Rating
- 4 / 5
- Likes
- 4
- Downloads
- 120
- Makes
- 1
- Views
- 925
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I made the following changes:
- Relocated the holes for the SMA connectors to align with the board.
- Aligned the screw holes for the SMA Header with the case.
- Aligned the screw holes for the cover with the case.
- Added a slot to mount the board in. This keeps the board from floating around in the case and does not require any hardware to hold the board.
- Resized the SMA Header height to match the height of the case and cover.
I used PRUSA Slicer to add paint-on supports on the case for the SMA header and the USB openings. Print time for all three pieces was 2h 37m using a .4 nozzle and .0.25 layer height.
Category: Electronics