1 / 1
Apple Watch Stand CRT Monitor — image 1

Apple Watch Stand CRT Monitor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Got beige?

Rating
5 / 5
Likes
35
Downloads
81
Makes
1
Views
1,154
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

I recommend printing at 10% infill to make sure the back of the model isn't too heavy

The cord will be strained at the bottom, but it is hard to avoid it to keep the design of the model

Depending on your printer, the charger may be hard to put in the model, so supports can be placed there

I've also included the Fusion 360 file if you want to remix it or make modifications. It's in the public domain

Edit 7/3/22: I added connectors for the parts so you can print it in 4 parts with less support. If the connections are too tight, sand them down. If they're too loose, use glue. Also this is different than the one in the photo

You'll need supports on “back.stl" but supports are recommended on “front.stl” and a brim may be needed on “joint.stl”

Do not print the stand or joint with any horizontal expansion as it might be loose, and it will be a tight fit to keep it from drooping 

Edit 7/5/22: Added spacer and spacer stand to prevent it from drooping and to route the cable

Tags