Cubed Super Clicky Fidget Button
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cubed version of 3D Printy's Super Clicky Fidget Button.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 106
- Makes
- 0
- Views
- 987
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Hardware
Required
A spring that is about 15mm long and 5mm in diameter. The design can use larger and smaller springs.
Spring harvested from a standard click pen are a little longer than needed, but should work. If the click mechanism feels too stiff, shorten the spring with wire cutters.
Optional
A long M3 bolt to transfer the click action out of the device for some secondary purpose - or just to demonstrate the change in distance caused by the click.
Printing
Supports are only needed for the button.
The cam includes a thin 1 layer bridge over the bolt hole. If you intend to use a bolt, puncture that bridge with the bolt.