Smosh Live UTI 2022 Event Logo - Single Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.86 – €3.50 net (excluding VAT)
For file: smosh-uti-2022_0.2mm_PLA_MK3S_3h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.18 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 3.46 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
3D printed version of the Smosh Live UTI 2022 Event Logo meant for single extruder printers.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm a pretty big fan of Smosh, and their drunken live event last night was so awesome that I wanted to see if I could 3D print its logo with Sloshy the Red Solo Cup on it.
This is designed for single extruder printers using M600 as the tool change command. It prints face down on the build plate, so make sure you have your first layer dialed in. I used GIMP, Inkscape, Blender, and PrusaSlicer to perform the JPG → SVG → STL conversion.
Recommended Print Settings
Use the provided 3MF file, it already has all of the pieces assigned to the correct colored extruders.
- 0.2mm layer height
- 0.2mm first layer height
Optional: Slow down the first layer by pressing the knob on the printer, and using the Tune menu on the printer to change the speed. I slowed mine down to 25% for the entire first layer, but that increased the print time to 7.5 hours, so you might not want to do that.
If your first layer isn't good, you can rotate the model 180 degrees around the Y axis and print it face up. You'll also need to translate it in the X-Y plane so it fits back on the build plate between the edge and the wipe tower.
Filament Swap Ordering
There are 12 filament swaps you must perform in this order. I find it helpful to keep a checklist, and tick each one off as you perform the swap.
- Black
- Red
- Yellow
- White
- Black
- Red
- Yellow
- Black
- Red
- White
- Black
- Red
- Yellow