1 / 5
Microbot Fidget
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fidget based on Hiro's Microbot from bighero6
- Rating
- 4.545 / 5
- Likes
- 720
- Downloads
- 2,946
- Makes
- 26
- Views
- 17,832
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
The Microbot Fidget is based on Hiro's Microbot from Big Hero 6
Both the parts snap fit together.
Print details:
- Material Used : Prusament PLA Prusa Galaxy Black
- Layer height: 0.15mm
- Supports: No
- Brim: Yes (Only for vertically printed parts {micro1 and micro2alt})
- Infill: 20% ( I went with 100% coz I really liked the weight)
Tested it at 50% scale too and works fine. Scalability should not be an issue.
The model has been designed to have a satisfying tactile snap at 90 degrees angles.
Note:
There are 2 files for the socket joint part, print the recommended version and stick both halves using some superglue.
I haven't printed the alt version as I feel that there's a high chance of the part breaking (layer separation)