Anycubic Chiron Hemera/Hermes Adapter Plate
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.79 – €2.18 net (excluding VAT)
For file: hermes-adapter-plate-v8_02mm_pet_mk3smmu2s_2h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.98 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 2.01 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hemera/Hermes adapter plate for the Anycubic Chiron.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 218
- Makes
- 2
- Views
- 2,512
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Public Domain
Hemera/Hermes adapter plate for the Anycubic Chiron.
This adapter plate allows you to mount the Hemera unit without modifications to the baseplate of the Anycubic Chiron.
You can also still use the included bed leveling probe, but I have not yet measured the offset. (Height should be very similar, but X/Y is offset a bit)
Needs 6x M3x10 screws.
3x M3x10 screws to secure the Hemera unit on the adapter plate, 1x M3x10 from the front and 2x M3x10 from the back to mount it to the X carriage.
UPDATE 2020-02-29:
- Lowered mounting position of Hemera unit
- Added cutout for X axis limit switch cables (more clearance)
- Added new component to mount the Z-probe (old one did not fit anymore)
Print instructions
I used black Prusa PETG on a Prusa MK3S and can directly mount it after printing.