Bamboo Bag Clip
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.88 – €1.08 net (excluding VAT)
For file: Bamboo Clip v8_0.15mm_PETG_MINI_1h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.98 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.12 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A bamboo-themed bag clip
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 70
- Makes
- 0
- Views
- 627
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Sticking with the green filament at the end of it's roll: I present the Bamboo Bag Clip.
This is a simple clip that is for holding bags closed and has a bamboo plant motif. The working space (length between the hinge and clasp) on the clip is 140mm. The leaves on the end are to help you pop open the device, as pictured below. It helps to work one side then the other when doing this.
Printing
This is a print-in-place model, no supports needed. You'll likely want to use a material like PETG for the best longevity, but as usual, PLA does OK. Print at 100% infill for best results.
Special 3D printing hack: Rotate this model in your slicer to be diagonal on the plate. You'll find it prints faster!
