Voron V0 3.5" RPi Touch screen mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skirt mount for RPI 3.5" Touch screen
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 218
- Makes
- 0
- Views
- 3,170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Since I really like the KlipperScreen on my other printers I made a mount for a smaller screen for the V0.
Here are the docs for the Klipperscreen.
https://klipperscreen.readthedocs.io/en/latest/Hardware/
Just as reference. I ordert this screen:
https://www.amazon.de/dp/B01JRUH0CY?ref=ppx_pop_mob_ap_share
As for hardware I used standard “Voron stuff”
2x M3 heatset
2x M3x6 BHCS
4x M2x5 Self Tapping Screws for Plastic (you can use the Voron BOM 10mm screws and cut them with some side cutters)
Print settings I used also Voron recommended but since it's not structual is doesn't really matter.