adjustable leg for laser cutter grate bed
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.85 – €3.49 net (excluding VAT)
For file: leg-screw_0.15mm_PETG_MK3S_3h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.17 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 3.46 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a height adjustable leg for a grate to use with your laser cutter.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 61
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
With these adjustable legs you can use a grate on your laser cutter bed. Sometimes these grates are not fully level, with these legs you can adjust the height of your bed. It has a holder to hold a wooden plate at the bottom, this way the laser will be blocked and small fragments will fall on the the plate. It has some holes to use set screws to lock the height, the plate and the grate.