Belt/strap blanks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Another quick weekend project. Blanks to use with wet forming belt and strap loops.
All are:
- 4.5mm thick (.18") - I intentionally made these thin so the end result will be snug and leave some room to stretch. You can always increase the thickness by adding a layer of scrap leather to the bottom.
- 125mm (5") long
5 widths: 50mm (2"), 44.45mm (1.75"), 38mm (1.5"), 31.75mm (1.25"), 25mm (1")
I've only printed the 2" size (Installed Mesh Tools to Cura to break apart the pieces)
- PLA with 60% infil, 4 Wall Line Count, and 50% Skin Overlap (not sure this is worth saving time over sanding).
- Sanded with 120, 220, 320, 400, and burnished with scrap leather.