1 / 2
Hinge for thin sheet of plexiglass < 3mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinge for plexiglass up to 3mm Thick (app 1/16")
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified hinge for holding plexiglass with holes to securd (you can drill plexiglass). Also modified where the hinge will make a 90 degree angle with edge securing base of the hinge.
Printed in PLA
will print on Prusa Mini+
15% infill is sufficient (I used adaptive cubic)
.2mm layer (Used .35 first layer to help adhesion)
Used 70C bed to help adhesion
.4 nozzle
Hold the hinge at base to loosen.