1 / 3
Star Christmas Tree Topper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I couldn't find a basic star with clean flat faces so I modeled one for myself. I recommend printing it upright with…
- Rating
- 4.818 / 5
- Likes
- 112
- Downloads
- 1,277
- Makes
- 13
- Views
- 3,621
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I couldn't find a basic star with clean flat faces so I modeled one for myself.
Printing Instructions:
I recommend printing it upright with zero bottom layers (to make the hole) and supports for the bottom edges of the spokes on the star, 0% infill, and 2 perimeters. I attached an image of the supports I had, it makes a thin wall. It took about 2 hours to print at 0.24mm layer height.