Peristaltic Pump and 775 Motor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made to hold a 2in diameter peristaltic pump (specifically this one https://www.thingiverse.com/thing:454702) and a…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 554
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Made to hold a 2in diameter peristaltic pump (specifically this one https://www.thingiverse.com/thing:454702) and a 775 drill motor. Includes and adapter from the motor shaft to the pump. Also has fittings for m3 nuts to be inserted so it can be screwed down with m3 screws. Pump must be downloaded separately as I didn't design it.
I press fit the shaft adapter into the pump before pressing the pump onto the motor. Then used superglue to fit the pump and motor in place. As of writing I haven't used it yet as I don't have the necessary motor drivers.
Category: Parts